Soldering technique involving the application of solder prior to the actual joining. To solder, the parts are joined and heated, causing the solder to re-melt, or re-flow.
The alignment of a circuit pattern on a substrate.
The marks used for aligning successive processing masks.
The change in resistance of a resistor through aging and usually rated as percent change per 1000 hr.
The film resistor outline. (see Aspect Ratio)
The contact area between a film resistor and a film conductor
Resistor Paste Calibration
The characterization of a resistor paste for resistivity, TCR and other parameters by screening and firing a test pattern using the paste and recording the results.